battery products

Unified battery packs

Bestgo Power make some unified battery packs for common markets. For example battery packs for electric bikes, electric scooters etc. They are mainly Li-NCM type battery packs which can be built with good energy density based on high safety assurance, we can also make LiFePO4 battery packs according to customer requirements. We take common type e-bike aluminum or plastic cases from suppliers and build battery packs in quantity for customer.

We could use both pouch cells and cylindrical cells (Samsung, Panasonic etc.) to build this kind of battery packs.

48V 12Ah Li-ion battery pack

Here are 13 pcs of 3.7V 12Ah Li-NCM pouch cells arranged as 13S1P configuration, with cell tabs go through the converting board and lay down for the soldering. After that here will be a PCB type BMS attach to cell pack with foams between them for the isolation. then packaged with foams and PVC sheets and heat shrink film over all the entire pack, then put into the anti flame plastic case and build power wires go outside. The plastic case has handle for the lift and carry.

Click here to download the datasheet.

Unified battery packs

36V 20Ah Li-ion battery pack

Here are 10 pcs of 3.7V 20Ah Li-NCM pouch cells arranged as 10S1P configuration, with cell tabs go through the converting board and lay down for the soldering. After that here will be a PCB type BMS attach to cell pack with foams between them for the isolation. then packaged with foams and PVC sheets and heat shrink film over all the entire pack, then put into the anti flame plastic case and build power wires go outside. The plastic case has handle for the lift and carry.

Click here to download the datasheet.

Unified battery packs